• 10G Transponder for shortand long haul applications
• Supports OC-192/STM-64, 10GbE LAN PHY and WAN PHY
• Performs full 3R (retime, reshape and retransmit) signal regeneration
• XFP or OTX line interface(1310nm, 1550nm or DWDM)
• Link distances up to 250km without in-line amplifiers
• G.709 line rate with Forward Error Correction (PM1001LH)
• Digital Diagnostic Monitoring and management via SNMP or Ekinops Element Manager (EEM)
• Remote management through embedded 10Mb DCC (PM 1001LH)
• Hot swappable
• Wire speed performance with low latency and jitter
|
|
 |
 |
10G Long-Haul Transponder & Repeater |
The PM 1001 transport modules are part of the Ekinops 360 and are used as 10G or OC-192/STM-64 signal repeaters, long haul extenders and as DWDM transponders. The PM 1001 transport modules consist of the PM1001LH (Long-Haul transponder) and the PM1001RR (Repeater). The PM 1001LH support OC-192/STM-64 and 10GbE LAN on the client side and G709 on the line side. PM 1001RR support all 10G protocols from 9.95 Gbps to 10.709 Gbps, including 10GbE LAN PHY, WAN PHY and OC-192/STM-64.
The PM1001 can be used to transport 10G traffic in Metro Regional and Long haul DWDM networks. It can also be used to increase capacity of existing WDM networks. Configured with an ITU DWDM optic it can be connected directly to a DWDM MUX of an existing WDM system and transport additional data at 10G rate over an additional wavelength.
The PM 1001 Long-Haul transport modules can be fully managed through SMNP or Ekinops Element Manager (EEM), which includes CLI and java-based GUI.
|
|
|
