Inverse multiplexer
The PM 1001 IM module is an Inverse Multiplexer that accepts 10G traffic (10GbE orOC-192/STM-64) on the client side and transmits that data over four 2.5G line ports.When transporting 10GbE LAN PHY traffic the 1001 IM can use one, two, three or four2.5G line ports and implements flow control when less than four ports are available.
The PM 1001 IM has XFP interface on the client side and four SFP interfaces on the lineside. Using CWDM or DWDM SFPs the 1001 IM can send four 2.5G wavelengths overthe same fiber. Thus enabling the transport of 10G traffic to long distances even whenfiber characteristics does not allow standard 10G transport.
The 1001 IM includes an embedded DCC for remote management.
It maps one 10GbE LAN, 10GbE WAN or OC-192/STM-64 input to four 2.5G optical output lines.
KEY FEATURES & BENEFITS
• Transparent 10GbE or OC-192/STM-64 transport over 4x 2.5G optical lines
• 10GbE LAN transport over one to four 2.5G optical lines
• RMON on 10GbE client input and output signal (optional)
• Accepts up to 120 µsec differential delay on the four 2.5G lines
• XFP client interface and SFP line interface
• Configuration and management via SNMP
• Loopback on client and line side
|
